Running Too High EGT's - Water/Meth?
#1
#3
ill give him a call , i found this ... pretty impressive
DYNO RESULTS: '04 CUMMINS EFFECT OF WATER-METHANOL CONCENTRATIONS
RWHP TORQUE
Stock 279 hp 580 lb-ft
Baseline (with Edge EZ) 379 hp 766 lb-ft
Windshield washer fluid 429 hp 873 lb-ft
50 percent methanol 453 hp 930 lb-ft
75 percent methanol 487 hp 960 lb-ft
DYNO RESULTS: '04 CUMMINS EFFECT OF WATER-METHANOL CONCENTRATIONS
RWHP TORQUE
Stock 279 hp 580 lb-ft
Baseline (with Edge EZ) 379 hp 766 lb-ft
Windshield washer fluid 429 hp 873 lb-ft
50 percent methanol 453 hp 930 lb-ft
75 percent methanol 487 hp 960 lb-ft
#4
i found out it is very trickey to get it set right i would say that you would need a dyno on hand when setting the system up to see were your gains would be on the settings. As a matter of fact i still dont have mine figured out but i got it set to were the motor sounds like it not gettin to munch to quick. o well
#5
#6
#7
#8
#9
Make your own kit, DM, and you will be happy. Remember methanol/water mix the more water the more cooling. So you can batch up your own mixture (here a 55 gallon 99+% pure methanol delivered to my garage is only $130.00)- and if towing use more water ratio. I would use even straight water if egt's are too high. But for power - the chemical sites say that methanol/water miscibility burn ratio is best at 65/meth 35/water for power. Above that is wasting meth. I would think a 2 stage system ran with 2 selenoids first one small jet for mileage set at 1 lb boost and second set larger jet set at 7lbs boost for more power when needed. You would get mileage and power that way. PM me if you want help with the kit.
#10
Make your own kit, DM, and you will be happy. Remember methanol/water mix the more water the more cooling. So you can batch up your own mixture (here a 55 gallon 99+% pure methanol delivered to my garage is only $130.00)- and if towing use more water ratio. I would use even straight water if egt's are too high. But for power - the chemical sites say that methanol/water miscibility burn ratio is best at 65/meth 35/water for power. Above that is wasting meth. I would think a 2 stage system ran with 2 selenoids first one small jet for mileage set at 1 lb boost and second set larger jet set at 7lbs boost for more power when needed. You would get mileage and power that way. PM me if you want help with the kit.
Share the info - Im sure some of our other members would be interested too.