i just recived the raptor 150 for my 00 dodge short box extended cab 5spd. there is not alot of room to mount it on the frame and was wondering if some1 knows of a good place to mount it and pics would be nice

 

inside of the frame. between the fuel tank and crossmember. goodluck

 

that is where i mounted mine. Only mod i had to do was i took a floor jack and a piece of medal and pushed floor board up about a half inch to give it room and to get rid of vibrations. Did your raptor come with fittings to run 1/2" line all the way to the vp or just to the filter?

 

it came with the fuel line and i think it will go to the vp

 

The Raptor only goes to the Filter. If you run it straight to the VP then your not filtering the fuel.

 

ok why do that not send the supply fittings to go from filter to vp? Can you get the fittings?

 

We offer the Vulcan Filter to Injection Pump Big Line Kit.


Big Line Kit

 

Vulcan has a simple "Big Line Kit".

Basically, adapters and fittings to go from the filter to injection pump. It also has a pressure 90* for the injection pump connection giving you that pressure port access. The hose is Bio/ veg/ diesel compatible and is better line than the blue air line included in the aftermarket fuel system kits.



Dave