5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

edge drag comp and 65 hp injectors?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-15-2010, 08:40 PM
98dodgecummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Oct 2009
Posts: 510
Likes: 0
Received 8 Likes on 7 Posts
Default edge drag comp and 65 hp injectors?

I was wondering if 65 hp injectors and a drag comp would make good power? right now i just have 65 hp injectors and im now looking for a drag comp and i was wondering if it would make good power? Thank You.
 
  #2  
Old 02-15-2010, 09:01 PM
NCFPD's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Louisville, KY
Posts: 585
Likes: 0
Received 10 Likes on 7 Posts
Default

what elese do you have done to the truck you need to fill out your sig the guys on here can help you better if they new everything about your truck.

but yes i think that it would make good power but you must have gauges and lift pump and possible trans work valve boddy and torq converter work done at least
 
  #3  
Old 02-15-2010, 09:04 PM
98dodgecummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Oct 2009
Posts: 510
Likes: 0
Received 8 Likes on 7 Posts
Default

well my truck is a five sped with a good non stock clutch. and i have fass ddrp pump. and yes i have fuel pressure boost egt gauges from glowshift.
 
  #4  
Old 02-15-2010, 09:17 PM
dodge rodder's Avatar
Diesel Wrench
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

i think the ddrp might be a little small for that setup but not sure what the output is. the raptor 150 is a good cheaper pump. i got the ard. with the rv275 and they suck the fuel presser down a little bit.
 
  #5  
Old 02-15-2010, 09:23 PM
NCFPD's Avatar
Diesel Wrench
Join Date: Sep 2009
Location: Louisville, KY
Posts: 585
Likes: 0
Received 10 Likes on 7 Posts
Default

yea the ddrp is a lil small for that set up but i love my raptor 150 its great and good prices to
 
  #6  
Old 02-15-2010, 09:41 PM
98dodgecummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Oct 2009
Posts: 510
Likes: 0
Received 8 Likes on 7 Posts
Default

at idle 20 psi then highway 16 psi and then at wot 11 psi.
 
  #7  
Old 02-15-2010, 09:55 PM
dodge rodder's Avatar
Diesel Wrench
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

but put that extra power comp edge on with the 65 injectoers and you will go in to the danger zone under 8 psi. raptor 150 it would be more safer than the ddrp, can gripe or brag never run one but heard it was more for stock to mild.
 
  #8  
Old 02-16-2010, 09:10 AM
98dodgecummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Oct 2009
Posts: 510
Likes: 0
Received 8 Likes on 7 Posts
Default

do you have to drop the tank on the raptor 150s?
 
  #9  
Old 02-16-2010, 09:26 AM
Diesel Nut's Avatar
Diesel Bombers Sponsor
Join Date: Jun 2007
Location: Sacramento
Posts: 1,321
Received 109 Likes on 87 Posts
Default

Only if you wish to install a draw tube. We use FASS here and on the 150gph units we recommend a draw tube. the 95gph units get enough flow through the stock pick up.
 
  #10  
Old 02-16-2010, 09:28 AM
98dodgecummins's Avatar
Diesel Wrench
Thread Starter
Join Date: Oct 2009
Posts: 510
Likes: 0
Received 8 Likes on 7 Posts
Default

i heard the new raptor 150s you dont have to drop the tank?
 



All times are GMT -5. The time now is 07:53 AM.