DIY 3rd brake light
#1
DIY 3rd brake light
i bought a smoked 3rd brake light for my 99 dodge from darrel at dpp. he had a killer deal and couldnt pass it up.
first u have to take the 2 phillips screws out of the stock 3rd brake light
then u pull the bulbs out of the stock 3rd brake light. then u have to pull both center bulbs out of the wire harness.
and plud the new wire into the stock sockets for the leds
then u push the wires and put the stock socket into the 3rd brake light and the two outer bulbs into there place
then reinstall the two phillips head screws back into it
here is a few pics of the lights lit up. sorry there not the best, using the camera phone
outer lights for the bed
3rd brake led lights
and both together
first u have to take the 2 phillips screws out of the stock 3rd brake light
then u pull the bulbs out of the stock 3rd brake light. then u have to pull both center bulbs out of the wire harness.
and plud the new wire into the stock sockets for the leds
then u push the wires and put the stock socket into the 3rd brake light and the two outer bulbs into there place
then reinstall the two phillips head screws back into it
here is a few pics of the lights lit up. sorry there not the best, using the camera phone
outer lights for the bed
3rd brake led lights
and both together
#2
Thread
Thread Starter
Forum
Replies
Last Post
Rcracer78
Audio Equipment/Electrical
1
04-20-2015 12:49 AM
FELTONMICHAEL
Ford Powerstroke 03-07 6.0L
0
12-28-2014 01:09 PM