2nd Gen Dodge Control Arms
#11
I plan on offering those, along with many other items for our trucks, to those who want them, but not untill I have first made a set to run on my own truck to ensure that they are 100% safe. If I don't trust it enough to run it on my truck There is NO WAY I am going to let somebody else run them. I will definately let you guys know when I get stuff going and I am able to supply what I hope to be a decent demand.
Last edited by J-Pipes; 12-26-2009 at 06:44 PM.
#12
#13
#15
#16
Diesel Bomber
iTrader: (1)
Just the lower,this is to keep the pinon angle for thr front drive shaft correct,when a leveling kit is put on.I have these on my 02 with a ajustable track bar with a 34x11.50 tire with no rubbing with a 4.5 inch back spacing on my rim MOTOS.hope this helps dm.Those in the pic are for the 01.
Last edited by turbo20psi; 12-29-2009 at 07:40 PM.
#17
#18
I've been thinking of building a set too, as I have 100' of 1 1/2" DOM already and a notcher and all that good stuff.
Anybody have any good ideas on how to make them adjustable though? I want to be able to run them with my leveling kit in on the street, and then when I go to race, I'm going to pull the leveling kit and run some shorter springs to drop the truck down a little bit (2" bellow stock). Not sure how much adjustment I'll need yet, probably only an 1 or so total I would imagine though.
Sean
Anybody have any good ideas on how to make them adjustable though? I want to be able to run them with my leveling kit in on the street, and then when I go to race, I'm going to pull the leveling kit and run some shorter springs to drop the truck down a little bit (2" bellow stock). Not sure how much adjustment I'll need yet, probably only an 1 or so total I would imagine though.
Sean