Airdog II with a Edge w/attitude
#1
#2
The following users liked this post:
01trailerpuller (10-26-2009)
#3
summit sells a barbed fitting also that you just put inline and it has a pipe thread fitting in it that the sending unit will screw into. I think it was about $10.
---AutoMerged DoublePost---
here it is Mr. Gasket 2975 - Mr. Gasket Fuel Pressure Gauge Adapters - Overview - SummitRacing.com
---AutoMerged DoublePost---
here it is Mr. Gasket 2975 - Mr. Gasket Fuel Pressure Gauge Adapters - Overview - SummitRacing.com
Last edited by sledwrecker; 10-27-2009 at 08:46 PM. Reason: Automerged Doublepost
#4
#5
if the air dog is like the fass, then it comes with it's own 3/8 fuel line and has it's own filters integrated into the unit. The design is to totally eliminate the factory plumbing by replacing the banjo bolt on the VP44 witha fitting that the 3/8 line that is supplied with the unit can adapt to.
#7
#8
Thread
Thread Starter
Forum
Replies
Last Post
justinsbeck
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
01-18-2016 12:15 AM
somarillw
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-08-2014 09:07 PM