turbo injector ??'s
#1
#2
No, While the 40 was a good charger in it's day. It's not enough for a 200+ injector in a 24v. Also , Shaft damage would be a major concern. You would be spooling the charger hard in the first place, and it's not easy to prevent turbo surge on a VP truck. There are items available to help with surge but you could get you a good charger with the amount you would give for a 40 and blow off valve setup!
#4
#5
well. i dont tow with it right know alot. a few things here and there but nothin reall heavy. and i thought it would maybe do ok cause my dads truck has 125 injetors with stock turbo. seein about 52 lbs of boost and gets rid of 75 to 80% of the smoke and its still holdin up for now. nock on wood
#6
I would be knocking on somthing besides wood. No stock charger will hold 52lbs but a few times. If your seeing 52lbs, you need to check some things out. A factory HX series charger will implode very quickly that high. Also, It's actully loosing alot of power there, Your well out of the efficency of the charger!
Thread
Thread Starter
Forum
Replies
Last Post
avatardvr
Ford Powerstroke 03-07 6.0L
18
08-08-2019 12:38 AM
jrsavoie
Chevy/GMC 6.2L and 6.5L
1
02-06-2015 09:44 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM