help with quadzilla adrenaline
#51
#52
#53
#54
#55
#56
you 100% sure on this. Maybe I was just running on the ecm for my high idle and 3cyl. warm up but I thought I had the Adrenaline set for high idle I'll have to check this out when it gets a little colder here. I know I'll get to hear the 3 cyl. warm up
#57
#58
#59
I was just about to start my own " pulse questions page " But i just seen this
The pulse has 10 different settings on it doesn't it ? Does that mean you can only change #10 ? to an agressive tune ? Or do they all change when you download a beta tune ?
I want to be able to drive to the Dyno with some street manners, and then crank it over to TRQ mode without having to bring the laptop, Possible ?
Second question :
All these tunes have the high idle setting, can i turn them back off ? Because i am going to be building the ECM / IAT fooler for my truck, and the pulse will indeed turn them off, cause it adjust TPS %.
Last but not least,
Any one acctualy try to run the " ADR2_TORQ " On the street ? the one they tell yah not to ?
The pulse has 10 different settings on it doesn't it ? Does that mean you can only change #10 ? to an agressive tune ? Or do they all change when you download a beta tune ?
I want to be able to drive to the Dyno with some street manners, and then crank it over to TRQ mode without having to bring the laptop, Possible ?
Second question :
All these tunes have the high idle setting, can i turn them back off ? Because i am going to be building the ECM / IAT fooler for my truck, and the pulse will indeed turn them off, cause it adjust TPS %.
Last but not least,
Any one acctualy try to run the " ADR2_TORQ " On the street ? the one they tell yah not to ?
#60
1. yes you can run the torq tune... it just gets kinda surgy when under light throttle above 2000 rpm
2. Download the tune to the adr. then under custom tuning save it as tune 1 or tune 2. You will have 10 levels in each tune, but you can change it from 2-14 levels if you want, but it is all the same tune. All you have to do to switch between the 2 tunes is load the tune under custom tuning.
3. The high idle is enabled and disabled under the hardware section in the main menu.
Hope this helps
2. Download the tune to the adr. then under custom tuning save it as tune 1 or tune 2. You will have 10 levels in each tune, but you can change it from 2-14 levels if you want, but it is all the same tune. All you have to do to switch between the 2 tunes is load the tune under custom tuning.
3. The high idle is enabled and disabled under the hardware section in the main menu.
Hope this helps
Thread
Thread Starter
Forum
Replies
Last Post