Power Issues
#1
Power Issues
Today I tried to fully see how much power my Edge Comp gave me at 5x5, to my surprise when I mashed my foot to the floor it didnt seem to haull a$$ the way I thought it would and kinda "lugged" for a second till the power seemed to catch up.
Is that normal? I re-did the ground for the Edge and am going to do the IP wire tap again on Saterday. My TC locks and unlocks when its about to shift but my noise filter I'm getting will help that issue but does anyone have any suggestions or input. Is my setup still "slow" or can something be weird?
Also what next mod will I get the most bang for the buck besides my noise filter and guages I'm going to have next?
Is that normal? I re-did the ground for the Edge and am going to do the IP wire tap again on Saterday. My TC locks and unlocks when its about to shift but my noise filter I'm getting will help that issue but does anyone have any suggestions or input. Is my setup still "slow" or can something be weird?
Also what next mod will I get the most bang for the buck besides my noise filter and guages I'm going to have next?
#2
#3
#4
I'm going to re tap and probably solder the wire and make sure but I'm pretty sure its ok.
to answer luke I didnt try different setting I figured 5x5 was the best since it fuels alot lower. What do you guys have good experiance with setting wise?
---AutoMerged DoublePost---
Also, what should my next mod be for the most power? I have to take care of the trans but I'm saving up now. I was thinking a real exhaust kit since mine is just 4" straight that I made and injectors. I just want the power to beat little ricers.
to answer luke I didnt try different setting I figured 5x5 was the best since it fuels alot lower. What do you guys have good experiance with setting wise?
---AutoMerged DoublePost---
Also, what should my next mod be for the most power? I have to take care of the trans but I'm saving up now. I was thinking a real exhaust kit since mine is just 4" straight that I made and injectors. I just want the power to beat little ricers.
Last edited by 24v'd_Fury; 08-13-2009 at 09:03 PM. Reason: Automerged Doublepost
#5
#10
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
01-05-2016 12:03 PM
1ATony
1A Auto Parts
1
12-07-2015 01:09 PM
1ATony
1A Auto Parts
1
10-29-2015 02:11 PM