2002 24v, at 235hp stock......ive added 4 inch turbo back, bhaf, airdog 150, and juice with additude... whats my hp and torque ratings?

 

auto or 6 spd, i would say with an automaybe around 300-325 RWHP and meaybe alittle higher with a 6 spd

 

In his sig it says he's runnin an AT, My guess is with the aforementioned guess of 300-325

 

 

I just saw a buddies truck put down 359. It was a 235 hp '00. He had the J/A, AFE stage 2, RV 275 injecors, and a Fass 150/150. He had a freshened up 47re.

 

any one wana guess at my setup
HO wore out vp mach 4s 150 added +
comp 95 added on HOs
and a sps62 making upto 55#s
dyno guy guessed 432 /822 at blowing rock Did four runs middle of curve missing on all because of the rpm signal cut out each time.

I woulda thought at least 450 even at the 3300 feet of the mountains and the grey smoke state of the VP. With a fresh HO VP I should break 500

 

stock trans, my guess for you dieslsmoke is maybe, maybe 300-325 at most. youll lose at least 30-70 hp through an automatic at stock levels, thats why most companies if you read the fine print say to expect anywhere from 10-20 percent less with an auto.

 

Anyone have any torque numbers? I have pretty much the same setup as dieselsmoke74 and was also told the HP everyone told him but what about torque?

 

should be 638 or somewhere in there. I made 319 on my edge juice with cold air intake and 4" turbo back. now 488 959 with my mods

 

id say somwhere between 600-700 ft lbs at the rear wheels