I made 345/805 with 4" exhaust, afe intake and Adrenaline. This is on stock injectors and a stock HX35 Turbo. My VP has 123K miles on it.

 

was this done yesterday? The torque numbers I saw posted all seemed a little high to me. usually it's double the hp and most I saw were over double the hp.

 

Im going on the dyno soon with the 2002 i want to break 500 HP But i dont think i will ?

EEP 4-12 injectors
Super B Turbo
ATS Intake Manifold
ATS Exhaust Manifold
Quadzilla Adrenaline
Suncoast Triple Disk Torque Converter
Suncoast Pro-loc Valve Body
Schied SO VP44
Air Dog 150
BHAF

 

Last year at the same event with a different Dyno my truck made 316/716. I made more this time cause im running more boost and more fuel.

 

I make 488 with less fuel than you have. your injectors are 40hp more than mine so say you put half that to the wheels you should break 500 say 508 or so. and over 1k ftlbs. I am putting the 200's in next week. Going to see what it makes with them aug 8th at the coast

 

We saw a 02 with a Holley Blue, Jammer 5's and a 62/12 make 521hp. I believe that was the green truck that was about 4 spots before me.

 

Who did you reply to DM or me?
I feel like my edge box is out of date- vers.8.0
I wana trya adrenaline next
I guess I might be at the ceiling for a HO pump having almost 100k on it
I notice that 5x5 dont fuel much harder than 3x5
they say 5x4 is the best for dyno runs so thats what I used on the rollers the other day

 

If 5X5 feels like 3X5 then check your pump wire tap.

 

might need to try the 12cm turbine housing. So far the sps just doesn't have the snap the PS 62 did... and the topend diffence is only just noticable with a less smoke during fullspool on 5x5