What can i do to my 2001??
#13
#14
valve springs arent required (but reccomended) to hit 500, he could be close to 500, heck, im on the stock turbo and im making a multi- time dyno-proven 450 hp and 1070 ftlbs. also keep in mind that hes got a 6spd manual, he'll make more at the rear wheels then an auto with the same setup simply because the auto will eat anywhere from 40-70 hp
The following users liked this post:
oklahoma_6speed (01-25-2009)
#16
The following users liked this post:
BigManBrad (01-25-2009)
#17
The following 2 users liked this post by Diesel Dawgs Performance:
BigManBrad (01-25-2009),
oklahoma_6speed (01-25-2009)
#18
to make a nice street truck with 400hp a s300 based turbo is a good start and a set of 100hp injectors with a quad or edge or tst box will get you there and be able to drive and tow with very little heat issues... but like they say your trans will not take it.. ohh yeah a good fuel system is a must. fass airdog raptor.... I myself like the edge juice because it has the fuel pressure gauged that works and doesn't cost more. The box is advertised to make 120 more but with my turbo and injectors it made 159hp more than on 0. stock setting 244 level 5 403.
The following users liked this post:
BigManBrad (01-25-2009)
#19
#20
The following users liked this post:
oklahoma_6speed (01-25-2009)