Fass Or Airdog
#1
#2
#4
#5
This is the most common question I get asked.
The differences between the systems are pretty minor. The biggest one now is pump size and line size.
Either way, you are better off than stock!
The tank fitting is a dorman connection. And while the manufacturers do not say you need a draw tube in every application, I recommend it for EVERY install. Again, this is just my opinion.
Dave
The differences between the systems are pretty minor. The biggest one now is pump size and line size.
Either way, you are better off than stock!
The tank fitting is a dorman connection. And while the manufacturers do not say you need a draw tube in every application, I recommend it for EVERY install. Again, this is just my opinion.
Dave
#6
i would also reccomend a draw straw be put in, my fass 150 was installed before i bought my truck and the previous owner did not install a draw straw, under wide open throttle, itll suck the factory line dry and result in a temporay loss of PSI, im going with a 1.2 inch straw and lines all the way up to the pump, eventually im going to get even bigger factory injection lines from schieds too.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyMiR
24 Valve 2nd Gen Dodge Cummins 98.5-02
9
02-03-2018 10:05 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:55 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM