Help with mods?
#1
Help with mods?
Hey guys, Im looking to do some work on my truck with out putting out a whole lot of money right now. Currently I have a 2002 Dodge 2500 5.9 Cummins, auto trans, Air Dog II, S&B Intake, Edge CTS with Juice programmer, stock exhaust cut down to straight pipe. I don't tow as of right now but I want to keep my towing capabilities, Im looking for more HP and just an all around faster more powerful truck. I am interested in injectors but I don't know much about them and or what else is required to do. Any ideas id be happy to hear about them!!
#2
id put a 4" exhuast in it to flow better and then maybe a set of 50hp-75hp sticks.. that should give you a little extra power and not break the bank.
you can go to the vendor section and ask them for quotes on what you want tell them your set up and see what they recommend... on a side note is your tranny stock or has it been built or mildly modified???? if it hasnt had any work done to it you may want to save your pennies and have that built up a little... thats the week link....
you can go to the vendor section and ask them for quotes on what you want tell them your set up and see what they recommend... on a side note is your tranny stock or has it been built or mildly modified???? if it hasnt had any work done to it you may want to save your pennies and have that built up a little... thats the week link....
Last edited by diesel life; 07-28-2013 at 03:21 PM.
#4
Upgrade the shaft to billet one and get a triple disc converter for starters. Theres 1800 bucks. Some Converter come w lifetime warranty. Def need at least 4in exhaust. if your lookin for power get some head studs and 150 hp sticks after you build the tranny a little. You can still tow With 150 hp sticks and a stock turbo just turn your programmer down and.egts will stay fine. Ill send you a.link to a video of my truck before w 150hp sticks and stock turbo towing heavy and egts were fine.
---AutoMerged DoublePost---
Here is link of my truck before I put in he351ve, traction bars and 3850# dd clutch
---AutoMerged DoublePost---
Last edited by shellinger; 07-28-2013 at 08:08 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Spaky6.0mudder
Ford Powerstroke 03-07 6.0L
7
08-03-2015 08:54 PM
rtbcoop
12 Valve 2nd Gen Dodge Cummins 94-98
0
12-30-2014 02:13 AM