|
im not sure i just used a brush. did you also run coolant to your electronics? the pin is for lining things up. the one i have had a pin. the other turbo i have did not have a pin. its on the outside of the exhaust housing. you cant see it till you pull the exhaust housing off the center section. does your turbo spin freely? and have you tested your electronics?
|
Shouldn't need anything that strong. Varsol will do the trick just fine.
|
Originally Posted by shellinger
(Post 997091)
your he351ve was not working properly. we have done 4 swaps with that turbo, all of them have a smarty stacked with quadzilla adrenaline, and they have ddp 150hp injectors, no smoke when veins or "nozzle" is fully closed. what can happen is the electronics go bad or the nozzle ring gets stuck and you lose performance because the veins are not closing all the way.
|
keep in mind, you'll have to do that over and over and over.......:w2:
|
| All times are GMT -5. The time now is 03:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands