Don't tap the pump (connect the wire to the Injection pump) and you will have a little more power and mileage. If you drive respectably you will be ok. The EJWA CTS also allows for the EAS system. You can add pressure sensors, temp sensors, and another Pyro if you like. You can also install a back up camera to use with the monitor, making connecting to a trailer a little easier.

None of this is to go against what H.R.D sadi above, he is 100% correct. This is just extra information, and my opinion.

 

RA-

Excuse my ignorance, but what did you mean specifically "Don't tap the pump (connect the wire to the Injection pump) and you will have a little more power and mileage."Were you referring to the Edge CTS gauges only/non-programmer?

Thanx,
D.

 

The Edge will give about 60HP or so through the CAN connection under the hood. The rest comes from tapping the pump. Tapping the pump allows the EJWA to somewhat over ride what the pump is commanded to do by the ECU.

 

RA-

Not sure I understand. The EDGE product i refer to is the EDGE INSIGHT digital gauge set-up only. It's not a programmer or chip as far as I know. I don't believe it's installation adds any HP??

 

Sorry about that, I didn't read properly. The insight gives no extra power, as you know. I apologize for any confusion. I have one in my work truck, worth every penny.

 

Thanx for the input, and the rec.
Can't wait to get that bad boy in.....

D.