5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

exhaust brake stalling engine

Thread Tools
 
Search this Thread
 
  #1  
Old 11-08-2012, 09:34 PM
rockandrollcowboy's Avatar
Newbie
Thread Starter
Join Date: Nov 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default exhaust brake stalling engine

Hey guys i have a problem i have a banks exhaust brake on my 1998.5 dodge 5 speed. When it is on and i push in the clutch to downshift it suddenly drops my rpms all the way down to about 200 rpm and jumps back up to idle. Sometimes it will even stall the engine. Any help.
 
  #2  
Old 11-09-2012, 08:56 PM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

I'm not familiar with the Banks unit, but it sounds like a bad signal from the TPS (APPS). The brake should turn off when the throttle is release. Is this a new problem, or was the brake just installed and this problem happened?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
Momo12valve
12 Valve 2nd Gen Dodge Cummins 94-98
13
11-09-2015 09:54 AM
Jet A Fuel
6.7 Liter Dodge Cummins 2013+
8
10-21-2015 03:30 PM
charlie175
6.7 Liter Dodge Cummins 07.5-12
0
09-01-2015 04:01 PM
Jet A Fuel
6.7 Liter Dodge Cummins 07.5-12
3
08-03-2015 10:45 AM



Quick Reply: exhaust brake stalling engine



All times are GMT -5. The time now is 12:38 AM.