370Hp Injector Install
Diesel Bomber
Joined: Dec 2007
Posts: 1,202
Likes: 58
From: Buffalo, NY
I just thread a lug nut on the injector and then tap it with a hammer til it pops loose, then pull it out by hand, I did the pipe trick the first time or two, then lost the pipe and didn't bother cutting a new one.
Newbie
Joined: Dec 2007
Posts: 6
Likes: 0
From: Tennessee
well when i changed the injectors on mine i had a slide hammer on hand which worked well for 1-5 and on #6 i took a piece of all thread and took the weight off of the slide hammer and put it on the shortend all thread then just threaded the propper nut ontothe all thread and worked like a charm
Diesel Enthusiast
Joined: Jul 2007
Posts: 160
Likes: 6
From: Michigan
I cant give you detailed instructions at the moment, though last time I did a set of 12v injectors, the guy whos shop I was at had a pulling tool for 1-4 IIRC then 5 and 6 (or just 6 maybe) was the real PITA. I remember having to use a pry/crowbar to get 6 out- just a little tip for ya there. 
and good luck!
Oh, and I forgot if the pulling tool was a custom deal or if it is a specialty tool floating around. Maybe somone else with some insight may know where one is at and might be able to locate one for you to borrow....?
and good luck!Oh, and I forgot if the pulling tool was a custom deal or if it is a specialty tool floating around. Maybe somone else with some insight may know where one is at and might be able to locate one for you to borrow....?
