Build discusion
#11
My current set up is
4ks
No Plate
370's
O75ofv
Airdog 150
This is what I want to do so please tell me if I should make any changes, I want a DD, Tow Truck and a race truck...
5x18's
hx35 over a s480 with a ex gate
taper cuts
head studs
60lb VS
Haisley machine HD push rods
Bump the timing
Also how much power do you think this set up would make, Also if there is anything else I should do please say, Suggestions are welcome, Thanks Taylor!
4ks
No Plate
370's
O75ofv
Airdog 150
This is what I want to do so please tell me if I should make any changes, I want a DD, Tow Truck and a race truck...
5x18's
hx35 over a s480 with a ex gate
taper cuts
head studs
60lb VS
Haisley machine HD push rods
Bump the timing
Also how much power do you think this set up would make, Also if there is anything else I should do please say, Suggestions are welcome, Thanks Taylor!
This is my $.02 take it as you will ... 5x.014 sac style injector, no full cuts look for a 181 , tune afc, stay plateless, mack plug, get the 40psi spring for the air dog 150, go smaller on the primary charger , and run an external gate on that hx35
#12
Thanks man, I was thinking about getting an ex gate, idk wat size but I was looking at a 60mm gate with a max of 23psi and im sure I could spool the small charger on less than 23psi of DP, maybe like 10psi but idk, these are all guesses, when I get my taxes back is when all this is going into affect so we have time to discuss and perfect this, I greatly appreciate all your help and info!
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
10-15-2014 12:30 AM