When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok guys what am i doing wrong. I wired my trans temp gauge today its got power and a good ground but its not working. I ran one wire to the sensor one to a powersource and one to the a ground. Can you guys think of anything i may have missed.
Double check that you have the 2 Power wires not mixed up with each other, and test and see if you have a good ground, and constant 12v source. Other than that something must be wrong with the gauge itself