so if i go to a bigger charger will it push less boost but more power or air sorry guys just kinda new to all this just trying to learn and i like working on my own rig ya know thanks for the help

 

A stock HX35 will only safely make about 35 psi. For your HC1, its probably less than that. I've seen stock HX35 make up to 55 psi of boost, but they wont do it very long. An upgraded charger will be able to make 45 psi all day long, and will run lower EGT's too.

 

ok yea my stocker is pushing around 45 to 48 and I'm scared it's going to blow

 

with a new bigger charger with a better trubine wheel and housing your boost will go down, but your power will go up. The more air you can get in and out of these motor's the better

 

i was push 55-60 psi of boost out of my stock turbo and it lasted a little less then 6 month now im push 50psi of boost all the time but have had more out of my ats 3000 i had to open the gate a little so i didnt hurt anything for now

 

ok thanks guys im thinking about going with an ats aroura 4000

 

check the for sale section there is one for 750 on there

 

Dang I need to check these for sale sections when I start shopping for a turbo.