1/4 challenge
#12
track doesnt open untill march 9th thats when we race if i can save up the extra bills by then ill be gettin a turbo, yea i already planned on pulling tailgate spare all the seats toolbox, headache rack, ill probaly put only five gallons or so in. and haha yea i tried to race him for more so i could try and get a turbo or at least half of one out of it but o well 500s good too, do you guys think ill need dv's to beat him kuz i already running pretty hott how much power will i see out of those dv's on a stock turbo its got the stock 181's in it now.. thanks
#13
get some practice, if you can't get onto a track, figure out a 1/4 mile, get someone to start you and time you. If you know you can do the time to beat him, then all you have is RT to screw you up. Keep in mind that car has traction control, etc, and it'll be hard for him to screw up his launch.
Double check that car is stock though. People are running closer to high 13s in real life than what the brochure says.
Double check that car is stock though. People are running closer to high 13s in real life than what the brochure says.
#15
good luck on your race.... but i think you should get bigger then 191s if im not mistaken a 97 truck had about the same in it from the factory, i would suggest that you get laser cut DVs
---AutoMerged DoublePost---
High Flow Delivery Valves City Diesel - Diesel Performance
---AutoMerged DoublePost---
High Flow Delivery Valves City Diesel - Diesel Performance
Last edited by seandonato73; 01-23-2011 at 12:11 PM. Reason: Automerged Doublepost
#18
good luck on your race.... but i think you should get bigger then 191s if im not mistaken a 97 truck had about the same in it from the factory, i would suggest that you get laser cut DVs
---AutoMerged DoublePost---
High Flow Delivery Valves City Diesel - Diesel Performance
---AutoMerged DoublePost---
High Flow Delivery Valves City Diesel - Diesel Performance