he351vgt
#11
I just saw a video somewhere (youtube maybe?) where some guy put one on his 2nd gen 24 valve and he used the spring and solenoid. He had a video of the thing working while he was driving it and it looks like it works like a wet dream! The solenoid just controls the built in exhaust brake. I would probably go that route if I were doing it to my truck. Just my 2 cents
---AutoMerged DoublePost---
Here it is!
---AutoMerged DoublePost---
Here it is!
Last edited by GuyWithA24Valve; 11-14-2010 at 10:14 PM. Reason: Automerged Doublepost
#13
#16
#18
from what i have heard you can just ream out the holes with a diegrinder, take the studs out and match them up. possibly port your stock manifold a little bigger to match. and another way to go about doing it would be a wastegate to control the vanes. seems to work pretty well and there is some writeups on here and on other sites about how to do it. seems pretty easy
#20