help on turbo decision!
i have a 1996 12 valve..cold air intake 4 inch exhause stock turbo 370s 215 pump and no plate at the moment now im wondering since my truck smokes like a whore...should i be thinking about upgrading my turbo and if i should what should i go to that wont destroy my bank and make good flow?
|
Should be thinking about a tranny upgrade before anything. A turbo wont destroy your bank like a tranny will when you need a new one. Save a lot of money upgrade your tranny and not have to worry about it later. Then start looking into turbos that will fit your needs and budget for the time being. Deciding what turbo to get is hard because what will work for you now might not work down the road. Even if you are done adding more go fast things to your truck. You could take up a new hobby or job that will require you to tow heavy loads new turbo time. I love my truck and everything about diesels but its never ending. Always changing things up adding more go fast parts its a virus of the worst or best kind. Sorry for the long response to a simple question had a little extra time on my hands.
|
Is it auto or standard trans? And I have a 40 right now but spool up sucks and they have weaker shafts thaen the 35's so keep that in mind if u lef of the pedal fast
|
im going with a super b special or hx35 ht3b twin setup... havent decided which yet.. got a little more time before i have the spare funds:argh:
|
I'm getting an aurora 3000
|
i have a built suncoast it the truck auto so now im just looking for a turbo that will move some air...i have no clue where to start id like to do twins...but HA i would dick it all up soo....lookin for just a bolt on single
|
Originally Posted by blowinsmoke12v
(Post 638607)
i have a 1996 12 valve..cold air intake 4 inch exhause stock turbo 370s 215 pump and no plate at the moment now im wondering since my truck smokes like a whore...should i be thinking about upgrading my turbo and if i should what should i go to that wont destroy my bank and make good flow?
|
Look into a Super Phat Shaft 62 from Industrial Injections. I ran one on my 03 Cummins for years and loved it. When I upgraded to my current Silver 66 I sold it to my buddy Darren for his 96 12 valve. He has been running it for 3 years now and he loves it. It spools like a stock turbo but runs much cooler. It also doesn't surge with his auto tranny which is always nice.
I'm not a parts cheer leader but I have had a lot of turbos over the years and that was by far one of the best I ever had. Industrial's turbos will stand up to a lot of abuse! |
what did he have done to his 12 valve?
---AutoMerged DoublePost--- oh man 1850 for the phat shaft 62 :s: |
HE has a fuel plate, stock injectors balanced and shimmed, AFC housing is tweaked and a cold air intake. Nothing really crazy.
|
All times are GMT -5. The time now is 06:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands