12v build...kind of
#1
08-28-2010, 11:59 PM
12v build...kind of
OK guys here goes this is the start of my build of the 97 in my sig.
being added:
1. O-ringed head
2. 12mm ARP's
3. 0.020 HG
4. PDI manifold
5. BD Super B Single over an HTE3B Twins.
a. Twins all thanks to Chris Snyder and Eric (Superior ram) keeping me
working on them as I thought I was done!!! THANKS AGAIN GUYS!!!!!!!
OK I have the head, HG and studs ready for tomorrow.
PIx here for now! http://s746.photobucket.com/albums/xx104/cumminsfreak59/
What I need for now! a pix of a 12v head minus valve covers so I cna see where all the nuts and bolts go again
Also what studs go where from the ARP box.....I'm going to read the directions now
ps still may trade for a single we'll see how this goes im still not totally over :S:
being added:
1. O-ringed head
2. 12mm ARP's
3. 0.020 HG
4. PDI manifold
5. BD Super B Single over an HTE3B Twins.
a. Twins all thanks to Chris Snyder and Eric (Superior ram) keeping me
working on them as I thought I was done!!! THANKS AGAIN GUYS!!!!!!!
OK I have the head, HG and studs ready for tomorrow.
PIx here for now! http://s746.photobucket.com/albums/xx104/cumminsfreak59/
What I need for now! a pix of a 12v head minus valve covers so I cna see where all the nuts and bolts go again
Also what studs go where from the ARP box.....I'm going to read the directions now
ps still may trade for a single we'll see how this goes im still not totally over :S:
Last edited by cummins freak; 08-29-2010 at 12:01 AM.
#2
08-29-2010, 09:43 PM
Diesel Bomber
#8
09-04-2010, 01:51 AM
ok well i got the Exh manifod on the s300 mounted, and the 3b and hot pipe hooked up behind the s300. thats the good.
NOW THE BAD! I was told by DJK that everything i needed was included. Well Where is the innercooler pipe? there is no way you had this hooked up without one. I have a 4" V-band hook up on outlet of my 3b so I need to get a 4" V-band flang and clamp then a 45* boot to hook up the piping I bought. Im also going to be mocking up a bracket for my 3b and trying to hook up the two oil drains this week. well im making progress just a little ticked that I dont have that innercooler pipe. also the wrong size boot for the inlet on the 3b I need a 5.5" boot I was sent a 5" boot and since the seller wil not respond to my pm's about stuff not fitting nad missing THANKS ALOT DJK FOR 1/2 TRUTH'S.
anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me
anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me
NOW THE BAD! I was told by DJK that everything i needed was included. Well Where is the innercooler pipe? there is no way you had this hooked up without one. I have a 4" V-band hook up on outlet of my 3b so I need to get a 4" V-band flang and clamp then a 45* boot to hook up the piping I bought. Im also going to be mocking up a bracket for my 3b and trying to hook up the two oil drains this week. well im making progress just a little ticked that I dont have that innercooler pipe. also the wrong size boot for the inlet on the 3b I need a 5.5" boot I was sent a 5" boot and since the seller wil not respond to my pm's about stuff not fitting nad missing THANKS ALOT DJK FOR 1/2 TRUTH'S.
anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me
anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
05-28-2015 08:00 AM
Diesel Bombers
General Diesel Related
0
10-15-2014 12:30 AM
