12v build...kind of
 

OK guys here goes this is the start of my build of the 97 in my sig.

being added:

1. O-ringed head
2. 12mm ARP's
3. 0.020 HG
4. PDI manifold
5. BD Super B Single over an HTE3B Twins.
a. Twins all thanks to Chris Snyder and Eric (Superior ram) keeping me
working on them as I thought I was done!!! THANKS AGAIN GUYS!!!!!!!


OK I have the head, HG and studs ready for tomorrow.

PIx here for now! http://s746.photobucket.com/albums/xx104/cumminsfreak59/


What I need for now! a pix of a 12v head minus valve covers so I cna see where all the nuts and bolts go again

Also what studs go where from the ARP box.....I'm going to read the directions now




ps still may trade for a single we'll see how this goes im still not totally over :S:

Here is the best i can do hope it helps sorry its kinda small

why the .020 over head gasket?

Seems everybody is a fan of the thick gaskets. Still having a hard time figuring out why this is.

becasue they took material off the head when it was decked for straitness.

got ya, you did not say that in your first post :c:

figured is was understood when I got it o-ringed. Oh well now you know :jump:

ok well i got the Exh manifod on the s300 mounted, and the 3b and hot pipe hooked up behind the s300. thats the good.

NOW THE BAD! I was told by DJK that everything i needed was included. Well Where is the innercooler pipe? there is no way you had this hooked up without one. I have a 4" V-band hook up on outlet of my 3b so I need to get a 4" V-band flang and clamp then a 45* boot to hook up the piping I bought. Im also going to be mocking up a bracket for my 3b and trying to hook up the two oil drains this week. well im making progress just a little ticked that I dont have that innercooler pipe. also the wrong size boot for the inlet on the 3b I need a 5.5" boot I was sent a 5" boot and since the seller wil not respond to my pm's about stuff not fitting nad missing THANKS ALOT DJK FOR 1/2 TRUTH'S.

anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me


anyone want to trade a 3b with a v-band for a reguar old 3b cause that would just hook up for me