best intake.. reccomendations?
#12
#13
#14
Thats all that kit is, a BHAF with a holder
looks good Jake!
---AutoMerged DoublePost---
me too run that with the old smokey mount on my 1st gen and going to run a BHAF on the puller too!
---AutoMerged DoublePost---
me too run that with the old smokey mount on my 1st gen and going to run a BHAF on the puller too!
Last edited by big bad diesel 416; 09-02-2010 at 06:19 PM. Reason: Automerged Doublepost
#15
Don't waste your time on a BHAF if you are not going to properly enclose/heat shield it. The added intake temperature more than cancels out any gain in airflow as far as power production is concerned. You won't need that much air unless you are making 400HP anyway. The stock 1st Gen filter is rated at 450CFM, so good up to around 300HP. They were better flowing filters than what came out on the 2nd Gen's. The airbox is the restriction on a 1st Gen, and they can be fairly easily modded to increase "cold" airflow. It sounds like you already lost the stock setup somewhere along the way.
#16
#18
#19