5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

Fuel Plate??

Thread Tools
 
Search this Thread
 
Old Aug 4, 2010 | 07:11 PM
  #11  
big willy's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 730
Likes: 38
From: Columbia, Tn
Default

i took mine out last week and it made a drastic change in my power i can pull my trailer a lot easier now and i gain speed going up hills that i used to almost lose speed going up but one thing is you will lose mpg with no plate with it turned all the way up or that may have been due to the fact that i raised hell the first few days after i took mine out and also it wont smoke to bad unless u just hammer down on it atleast mine doesn't or until you hit od and start speeding up from there.

fill out your sig too so we know what your working with
 
Reply
Old Aug 4, 2010 | 07:47 PM
  #12  
toy4xchris's Avatar
Diesel Bomber
Joined: May 2007
Posts: 2,413
Likes: 109
From: lost
Default

Just make sure you have atleast an EGT gauge and keep an eye on your exhaust temps with that much fuel going into your motor you gotta keep an eye on it.
 
Reply
Old Aug 4, 2010 | 07:59 PM
  #13  
big willy's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 730
Likes: 38
From: Columbia, Tn
Default

im running no gauges right now but im taking it easy until i get them
 
Reply
Old Aug 4, 2010 | 08:53 PM
  #14  
TwistedApache's Avatar
Newbie
Joined: Aug 2010
Posts: 4
Likes: 0
From: Fountain City, In
Default

running plateless can be VERY street friendly, i run plateless & a gutted AFC and see no smoke in my daily driving. Its all on how you drive, if you drive normal & don't bog it through the gears you don't even hardly see a haze, but if you stomp on the loud pedal it will black out a 4 lane highway
 
Reply
Old Aug 5, 2010 | 01:19 AM
  #15  
big willy's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 730
Likes: 38
From: Columbia, Tn
Default

now see i can bury my skinny pedal and it'll put out a good bit but nowhere near as much as yall are talking about i must be missing something
 
Reply
Old Aug 5, 2010 | 02:24 AM
  #16  
Hightech_Redneck's Avatar
Diesel Wrench
Joined: Feb 2009
Posts: 912
Likes: 60
From: Northeastern, OH
Default

the preboost screw is where its at if your wanting more fueling.... check into phils sticky on adjusting the afc housing....
 
Reply
Old Aug 6, 2010 | 06:22 AM
  #17  
ztk7220's Avatar
Diesel Fan
Joined: Jan 2010
Posts: 77
Likes: 0
From: Freeport, Michigan
Default

i took my plate out and i am planing on doing this afc mods (lots of pics) - DieselRam.com
should i do all that he did with grinding and that thing with the washer
 
Reply
Old Aug 6, 2010 | 11:39 AM
  #18  
blackout94's Avatar
Diesel Fan
Joined: Jul 2010
Posts: 90
Likes: 0
From: new mexico
Default

i did i love it i deffinatly could tell the difference before i took the arm out
 
Reply
Old Aug 7, 2010 | 12:24 PM
  #19  
98cummins12's Avatar
Thread Starter
|
Diesel Fan
Joined: Jul 2010
Posts: 71
Likes: 1
From: Miami fl
Default

Thanks guys i took the fuel plate off and its a noticable difference. But im driving it very chill maybe a little throttle when tranny locks but besides that very normal. Next im doing the Valve body so i can start working my way up! You guys recomend Suncoast Valve body? Bully dog Valve body? or ATS valve body? im thinking of going with Suncoasts
 
Reply
Old Aug 7, 2010 | 12:32 PM
  #20  
big willy's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 730
Likes: 38
From: Columbia, Tn
Default

i'd have to say suncoast or georand (some1 check me on spelling) those would be your two best choices
 
Reply



All times are GMT -5. The time now is 04:15 PM.