3k govenor springs
#2
for your first time it should only take maybe an hour n a half. it took me that long because i was extremely cautious getting the shims out, but it really isn't that bad. pull the plug out of the side of the pump, replace 1 side, then roll the motor til u see the other spring n change it. what kit did u get? it should have instructions with it.
#4
#6
Also, there is a discussion here that also has written instruction of going thru the side....
I've yet to try it myself, but I will, eventually.
https://www.dieselbombers.com/5-9l-1...springs-2.html
I suggest buying 2 heater grid gaskets, before you attempt it though....
Last edited by Threesixty; 05-13-2010 at 04:19 PM.
The following users liked this post:
Dr. Evil (05-17-2010)