where to run mechanical oil gauge to
#1
#2
My factory gauge in the dash went south on a long trip to Tennessee in feburary. I looked down at the gauge and there was no oil pressure at all ... I quickly pulled over and found a Oreily auto parts and bought a mechanical gauge and installed it in the parking lot and whala over 60#s of oil pressure. There is a port on the top of the oil filter housing where i run mine to. It worked out perfect there...
#3
#4
#5
#6
i found the perfect place to mount mine i just did a auto to manual conversion and the place in the dash were the O/D switch was is just big enough to dremel a hole out and slide in the gauge.
---AutoMerged DoublePost---
did you have to get a nipple to screw into that port or additional hose or did it all come with the gauge?
---AutoMerged DoublePost---
did you have to get a nipple to screw into that port or additional hose or did it all come with the gauge?
Last edited by 96blackcloud; 05-03-2010 at 03:37 PM. Reason: Automerged Doublepost
#7
#8
The following users liked this post:
xzaq103 (05-03-2010)
#10