Getting A New 12V - Need Help With Build Up
#1
Getting A New 12V - Need Help With Build Up
Hey guys Im going to be getting a 12v in about a month. I want to start planning out the bombs. Id like to do 400-450 hp and 1kfoot lb. It will be a everyday driver a 5spd and a 215 pump. I need to be able to tow but no plans on big time towing just around 8k.
Thanks for the help in advance. MT
Thanks for the help in advance. MT
#2
#4
#6
gsk 4000 w/hd valve springs 60#
cam plate #0
191delivery valves
Injectors
overflow valve
High psi intercooler boots/clamps
Modified HX35-TW/14 w/gated housing, HT3B/26
ATS 3 piece pulse manifold, complete piping kit & AFE 5" filter
13" CON FE
Built tranny
4" exhaust
Gauges
BD exhaust brake 4"
stacks
Shifter switch for BD brake
Valet switch
Head stud kit
O-ringed head
cam plate #0
191delivery valves
Injectors
overflow valve
High psi intercooler boots/clamps
Modified HX35-TW/14 w/gated housing, HT3B/26
ATS 3 piece pulse manifold, complete piping kit & AFE 5" filter
13" CON FE
Built tranny
4" exhaust
Gauges
BD exhaust brake 4"
stacks
Shifter switch for BD brake
Valet switch
Head stud kit
O-ringed head
#7
#9
get some 370 injectors, 191dv's, 4kgsk, your favorite brand of turbo (62mm will work...but a 64 will be better over all, so say a 64/12) http://www.industrialinjection.com/id42.html , then exhaust, intake, a confe would do from southbend...but you will eventually burn it out a lot quicker than you would a dual disk
The following users liked this post:
Monster Truck (09-16-2007)
#10