Getting A New 12V - Need Help With Build Up
Hey guys Im going to be getting a 12v in about a month. I want to start planning out the bombs. Id like to do 400-450 hp and 1kfoot lb. It will be a everyday driver a 5spd and a 215 pump. I need to be able to tow but no plans on big time towing just around 8k.
Thanks for the help in advance. MT |
Sounds like a Great Plan George !
|
Thanks boss man. Anybody have a good bomb list for 400hp?
|
Gauges
Tranny upgrades Turbo Injectors |
What turbo should I go with? what sticks? 330s? what fuel plate to go with? is south bend a good clutch to go with?
|
gsk 4000 w/hd valve springs 60#
cam plate #0 191delivery valves Injectors overflow valve High psi intercooler boots/clamps Modified HX35-TW/14 w/gated housing, HT3B/26 ATS 3 piece pulse manifold, complete piping kit & AFE 5" filter 13" CON FE Built tranny 4" exhaust Gauges BD exhaust brake 4" stacks Shifter switch for BD brake Valet switch Head stud kit O-ringed head |
What he said.....
:U: |
WOW I wasnt expecting nearly that many parts for 400hp. How much are the dv's?
|
get some 370 injectors, 191dv's, 4kgsk, your favorite brand of turbo (62mm will work...but a 64 will be better over all, so say a 64/12) http://www.industrialinjection.com/id42.html , then exhaust, intake, a confe would do from southbend...but you will eventually burn it out a lot quicker than you would a dual disk
|
Thanks buddy. Thats pretty much what I was planning. What do the 191 dv's do? and should I get stronger valve springs with the 4gsk? Should I throw a #10 plate in the mix as well?
|
All times are GMT -5. The time now is 06:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands