Might want to reconsider the whole cutting your wastegate line thing.
|
Originally Posted by Threesixty
(Post 538442)
If you just want to go faster...
I don't see anything about a 3k/4k Governor Spring Kit (GSK) in your descriptions. Heh... ever think of just buying corvette or something?
Originally Posted by 12valvetater
(Post 538472)
Might want to reconsider the whole cutting your wastegate line thing.
|
Originally Posted by 12valvetater
(Post 538472)
Might want to reconsider the whole cutting your wastegate line thing.
|
The main reason would be the drive press. With cutting the wastegate and that small 12cm housing the drive press would go through the roof.
And when that happens it chokes the engine and you atuall lose more power than you gain |
Also did you just plain cut it or did you plug it.
|
Originally Posted by 85_305
(Post 537687)
Huh.. a 7k lb diesel dually wont burn it's tires. Son of a b*tch imagine that.
But anyways with the few mods in my sig I can lite up the tires on the right pavement and right clutch popping in 3rd gear. With 5 people in the truck. And 1,070 lbs of sand bags over the rear tires. Ask me how I know... |
I am in the same boat. I still need more but mine does go good now. gov springs,no plate,no afc with 30 lbs of boost works well.:jump:
|
Originally Posted by joey
(Post 538637)
Ummm dont wanna bag on you but his truck aint a dually, but i could be going blind also.
Originally Posted by j_k_auto
(Post 538740)
I am in the same boat. I still need more but mine does go good now. gov springs,no plate,no afc with 30 lbs of boost works well.:jump:
|
well i had a 94 but sold it and havent changed that. I plugged the waste gate cause my truck wont make more than 30lbs with it plugged so. And i moved the 6 plate around and put a cold air on it and it helped alot and it is a 2500.And i am about to order some GSK springs.
|
30psi is PLENTY on an hx35. Whats it boosting at now? Probably way too much
|
All times are GMT -5. The time now is 01:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands