are 191's or lazer cut's or custom lazer cut's to hot to be used on the strret?
since i have a 215 pump i have the 181s and they seem to be sufficient. i just didnt know if they would be to hott for the street.
im looking in a set of sdx or smokem 5x14's too

 

191's were my fav for the street. I have full cuts now and do not like them at all.

Your 181 dv's should be enough for what you have

 

What you have should be plenty for you, but 191's or even a laser cut, just not a full cut would work on the street, it all depends on what your wanting to do with the truck and your setup.

 

i do mostly daily driving with some towing. so i dont need anything extreme. i just know lazer cuts are really hott. especially with a load behind you

 

I really like my DDP DVs.

 

191's all the way.

 

Lasers and full cuts are the same thing... On the street they are not friendly at all 191 is more than what any truck on here can use. 181's are nothing to cry about either...

 

im doing 191; with sdx 5x14s

 

im doing sdx 5x14s to i think.. soon

 

full cuts, no plate, and 27* timing is a good time