Hello guys, I've done a bit of reading and came to the conclusion that trucks that are mostly stock, aka exhaust, 3k or 4k gsk, star wheel, fuel plate, intake, advanced timing and maybe injectors would suffice with a zero or ten plate. Does this sound about right?

Matt

 

i went with a 5. i think a 10 is too mild.

 

Too mild?

Also where can I buy a cheap fuel plate from?
Where can I find a write up to change my fuel plate?

 

if you use the search button on the top and search for the fuel plate installing. it should bring it up

as far as cheap fuel plate... they sell some on ebay for like $30.00 or something but i dont know how good they are

 

The fuel plate is an easy job I'm assuming?

 

yes it is real easy... i went with a 100 plate and i like it. you can also just take the plate out if you would like.. but watch the stock clutch or tc and x2 on the ebay fuel plate.. $30 and it does the same as the $250 tst plate.

---AutoMerged DoublePost---

too mild... meaning not enough fuel.

 

Ok ebay it is! I'll be looking for the ebay fuel plate. So I think I'm going to go with a #5 then.

Thanks for the input guys. Always appreciated!

 

i have the $30 ebay plate. works fine.

 

Thanks for the input, SOLD!

 

I made my own. all depends on what you want to do and how much fuel you want.