What size fuel plate fits me? I'm thinking a 0 or 10?
#12
#15
#16
I've read about the afc tuning.. I'm going to have to make a thread on that I think
---AutoMerged DoublePost---
So the boost elbow is just a little brass fitting right? The ebay shop says something like 270hp and 650lbs of torque from just the fuel plate and boost elbow. Seems fishy to me..
Last edited by 85_305; 02-28-2010 at 09:19 PM. Reason: Automerged Doublepost
#17
if its an auto its a 180
if its a 5spd its a 215.
and about your egts. check for boost leaks and clean your filter.
if you have a 5spd with the 215 it dumps alot more fuel than a 180.
it wont be hard to soar your egts. youll need to look into a turbo soon
---AutoMerged DoublePost---
Which pump do I have? The prev owner knows, I'll have to text him tomorrow if nobody knows.
I've read about the afc tuning.. I'm going to have to make a thread on that I think
1250* egt's aren't bad. Thats very sustainable
---AutoMerged DoublePost---
So the boost elbow is just a little brass fitting right? The ebay shop says something like 270hp and 650lbs of torque from just the fuel plate and boost elbow. Seems fishy to me..
I've read about the afc tuning.. I'm going to have to make a thread on that I think
1250* egt's aren't bad. Thats very sustainable
---AutoMerged DoublePost---
So the boost elbow is just a little brass fitting right? The ebay shop says something like 270hp and 650lbs of torque from just the fuel plate and boost elbow. Seems fishy to me..
dont make a thread. i can find you one that has alot of info with a full write up with pictures. and you dont want to hold egts past 1250* thats when the alluminu8m pistons melt. and boost elbows just restrict the boost to the wastegate accuator which holds the wastegate closed aloowing the turbo to keep spooling for more boost. it will give you more boost along with more power to a certain extent. the stock turbo is only efficient to about 35psi. also take into consideration that with a 215 pump it will flow alot of fuel, so a new turbo might be in the near future for you anyways if you wanna keep egts within a good range
Last edited by dan33klein; 02-28-2010 at 10:28 PM. Reason: Automerged Doublepost
#19
#20