Noted on the Pensacola Injecton. I ordered the $250 kit from TST that has the boost elbow and #10 fuel plate. They claim 330 HP and 750 Ft. LB. Torque. We will see.

 

If you got an auto ya better think about a tc and valvebody or the tc will start slippin and/or youll fry those clutches.

 

I have an 5 speed! Going to get the upgraded clutch kit from southbend.

 

A TST kit with a #10 plate will do what it claims and it WILL take out a stock clutch just as they say.So if you haven't already called SBC you better make that your next call.

Also keep in mind that the 10 plate will be hot and you will need to address the EGT's one way or another to keep them in check........Andy

P.S.-Stay away from Pensacola as if you search enough you will find all the horror stories about their shoddy work...Call the gang down at SDX it will be worth your time involved.

 

Good to get some feedback on the TST kit. I am installing a 5" exhaust at the same time as the TST kit. Hopefully this will allow for some heat dissipation. I ordered the gauges yesterday.

 

x2 on the sdx injectors

 

Just curious how many psi of fuel pressure does the stock P7100 pump put out?

 

well i took out my plate and gutted my afc, and stretched out my oveflow valve spring to 5/8 , took out my silencer ring, plugged of my wastegate, and a aftermarket donaldson, and my trucks runs lika raped ape, no joke, i hardly run 1,300 degrees and run jus about 34lbs of boost, so it all worked for me and nothing cost me a dime except my air filter all i need now is a set of 4k gov. springs and my truck will rippp

 

just go on ebay.. any numbe rplate you want with boost elbow for $29. it will make the same power as the tst plate will.

 

That sucks, I already bought the tst! They did include the dowel pin replacement though!