Killer Dowl Pin
#1
Killer Dowl Pin
Hey looking for some help on figureing out if this sounds like its the kdp. So went to start my truck one morning and was in the process of holding its Idole at 1000 rpms and all of yhe sudden I hurd a loud metal slam and grinding after so I shut it down and checked all valve and checked fuel pump and neather showed any problemsthen checked oil and did not find any big chuncks of metal but plan to pole pan and inspect further.
#2
#3
look at the side cover in between waterpump and fan. usually spits it out there. won't see much in the way of oil since you shut it right down. i would start there. i would pull front cover before pulling pan to see if dowel pin is still in place. check all inside cover bolts as they can come out as well.
#4
#6
Thanks I'm planning on pulling the cover tonight and checking out hope that it did not cause much damage. Also would this cause a loud ticking that would run with the rpms this started one week before this happened and caused me to adjust valves and check how the GSK springs that I installed were and all was fine but tick continued and seemed to be more noticable after heated up