200 lbs of water for less than $100 off the shelf. If you want to double as a fire truck.

 

Just don't put out the fire in the combustion chambers!

 

i have the aem kit it works real well but it is all about personal preference

 

alot of people use the snow performance one over on syty.net

 

i have a kit from AIS(alcohol injection systems) and i like it. it has 3 nozzles. i also ahve the 200psi pump. and i have a 20gallon tank in my toolbox i got the water tank from my local rv place. its just a water tank that rvs use to store fresh water in. you can get them in all different sizes. 5,10,20,30,and i think 40. the company that i bought mine from locally also sells them on ebay cheap with cheap shipping. just throwing that out there. i also think the check valve placement, and the nozzle placement is crittical. i had to play around with mine to get desired results. when i had mine right, i could be driving down the road 70mph at about 700egts and flip the override switch and in about 2 seconds my egts would drop to about 450-400 degrees. so was happy. and that is on water only no meth.
and the AIS kits i have found to be cheaper than snow or aem. with alot higher quality fittings and hoses. also with a massive 200psi pump. go to www.alcoholinjectionsystems.com get there number and give them a call and ask for RODNEY. they dont just sell you the kit. he takes alll your info down on your truth.
what hp/torque your makin. what boost your running, and what egts your running. then he takes all them factors and decides how many, and what size nozzles you would need. and if you decide you want more or less meth, they will exchange nozzles for free.
-dan

 

I'm thinking about putting a couple of smaller nozzles in the intake manifold cover plate closer to #1 & #6 (towards the front and rear of the manifold) for better coverage.

 

that would work.
i put two on the intake horn.
and 1 in the air intake pre turbo