need to buy pistons

Reply Subscribe

Thread Tools

Search this Thread

Jan 11, 2010 | 01:14 PM

#11

Smokem

Diesel Bombers Sponsor

Joined: Sep 2009

Posts: 391

Likes: 46

From: Iowa

HX40 and obsolete 82mm Garrett with a set of 5x0.016"? If you want to add antiquated technology to your deal, be my guest, I would sell it to someone on Ebay.

Jan 11, 2010 | 04:40 PM

#12

high line

Thread Starter

Diesel Fan

Joined: Dec 2009

Posts: 26

Likes: 1

From: heseria ca.

the t18 is an a40 model. i dint have an hx 40. the t18 has 2 sizes, an A40 and A90. the A40 has an 82mm inducer.not an 86mm and the turbine wheel is a little smaller than 111mm

---AutoMerged DoublePost---

thanks

Last edited by high line; Jan 11, 2010 at 04:40 PM. Reason: Automerged Doublepost

Jan 11, 2010 | 05:20 PM

#13

Smokem

Diesel Bombers Sponsor

Joined: Sep 2009

Posts: 391

Likes: 46

From: Iowa

What is the secondary? The turbine measurements I found are for the T1810 PN#407318-0001, still not worth using in my opinion. Save the money on the pistons and buy a better primary, real easy choice in my opinion.

Jan 11, 2010 | 11:46 PM

#14

high line

Thread Starter

Diesel Fan

Joined: Dec 2009

Posts: 26

Likes: 1

From: heseria ca.

don't have a secondary turbo yet, guru is one who is regarded as having great knowledge, wisdom and authority in a certain area, and who uses it to guide others (teacher).

Jan 12, 2010 | 07:32 AM

#15

PhilipR

Diesel Wrench

Joined: Nov 2009

Posts: 629

Likes: 44

Jan 12, 2010 | 06:23 PM

#16

Smokem

Diesel Bombers Sponsor

Joined: Sep 2009

Posts: 391

Likes: 46

From: Iowa

Can you get the compressor/turbine wheel inducer/exducer measurements and some pictures of the primary you have?

Jan 14, 2010 | 11:20 AM

#17

high line

Thread Starter

Diesel Fan

Joined: Dec 2009

Posts: 26

Likes: 1

From: heseria ca.

comp 82.8 x 127 mm turbine 92.5 x 128.3

Jan 14, 2010 | 02:42 PM

#18

Smokem

Diesel Bombers Sponsor

Joined: Sep 2009

Posts: 391

Likes: 46

From: Iowa

Blade count on the compressor/turbine? Seems like it would be quite slow to spool, no matter the AR housing, and probably won't support the hp of a smaller better desinged wheel combination.