5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

Got it turned up!!

  #1  
Old 12-06-2009 | 10:00 PM
CanYouFeelMeCummin's Avatar
Thread Starter
|
Newbie
Joined: Dec 2009
Posts: 6
Likes: 0
From: terrell texas
Default Got it turned up!!

I got a new plate on my truck and it will break them lose in fourth gear. It was a cheap and easy wasy to add horse power. It pull through every gear strong.
 
  #2  
Old 12-07-2009 | 07:15 AM
PhilipR's Avatar
Diesel Wrench
Joined: Nov 2009
Posts: 629
Likes: 44
Default

I hope you have Southbend Clutch on speed dial.....
 
  #3  
Old 12-07-2009 | 07:35 AM
12vcummins96's Avatar
Administrator

Joined: Aug 2009
Posts: 5,765
Likes: 340
From: Pearland Tx
Default

and ujoints
 
  #4  
Old 12-07-2009 | 11:05 AM
YOUNG GUNS's Avatar
Diesel Fan
Joined: Aug 2009
Posts: 40
Likes: 0
Default

are you shure it aint your clutch??? mine let go in fourth when i ground my plate
 
  #5  
Old 12-07-2009 | 11:10 AM
captain_stabbin's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 919
Likes: 27
From: houston, tx
Default

, damn stock clutches
 
  #6  
Old 12-07-2009 | 11:47 AM
CanYouFeelMeCummin's Avatar
Thread Starter
|
Newbie
Joined: Dec 2009
Posts: 6
Likes: 0
From: terrell texas
Default

eh when the clutch goes out i will put a performance one in. (got any suggetions on which one to get) but i only moved the plate alil bit.
 
  #7  
Old 12-07-2009 | 11:56 AM
PhilipR's Avatar
Diesel Wrench
Joined: Nov 2009
Posts: 629
Likes: 44
Default

I'm a Southbend guy from what I have driven and seen.,,,but Valair and Kenny's Pulling Clutches have good reps too. FYI....all it takes is "alil" bit with these trucks and you are shopping for driveline parts.
 
  #8  
Old 12-07-2009 | 12:03 PM
12.valve.hauler's Avatar
Diesel Enthusiast
Joined: Jul 2009
Posts: 213
Likes: 4
From: frankfort, KY
Default

sounds to me like the clutch is slippin. thats the same thing mine does
 
  #9  
Old 12-07-2009 | 05:52 PM
CanYouFeelMeCummin's Avatar
Thread Starter
|
Newbie
Joined: Dec 2009
Posts: 6
Likes: 0
From: terrell texas
Default

no it dont slip. I just moved it up alittle bit. I didnt take it out or move it al the way. It just has more horses and when i said pull i meant it goes through the gear with more ease than before.
 
  #10  
Old 12-07-2009 | 06:31 PM
monster12valve's Avatar
Diesel Bomber
Joined: Sep 2009
Posts: 1,355
Likes: 47
From: willowick, ohio
Default

i have a auto and when i floor it and the converter decides to lock...45mph, the boost kicks hard and rpm's go up.....but truck accelerates slow. damn 100plate trans will b done soon though
 

Thread Tools
Search this Thread
Quick Reply: Got it turned up!!



All times are GMT -5. The time now is 06:01 PM.