I was looking at getting bhaf; does anyone have a part # for a washable one with prefilter? I'll fab my own shield. napa wants 87.00 bux that seems like a lot for a throw away.

 

WIX # 42790
Donaldson # B105006
Baldwin # PA2820
Hastings # AF1012
DONALDSON # ECB105006
Fleetgaurd # AH19037 (MARINE # AH19004)
NAPA # 2790
Carquest # 87790
John Deere # PMAH19037
Big A # 93790
CATERPILLAR# 3I0005
FLEETRITE # AHR819037
LUBER-FINER# LAF2531
AFE # 20-40044
Fleetrite # AHR819037
Fram # CA6818
UNI # 908
Cummins # AH19037

 

$87 for a throw away filter??

I paid $55 for a washable non-oiled filter. AFE ProDry S.

 

The BHAF is a large paper filter that flows 680CFM, and is much more efficient than any of the aftermarket filters you can buy - filters more dirt. i.e. smaller sized particles. Drawbacks are it is big, expensive, paper, and non-reuseable. The reason I list paper as a drawback here is because there's no aftermarket housing for our trucks. Some have come up with nifty homemades that work quite well, stock pot, etc. Most just throw them in there under the hood with maybe an outerwears for protection and call it good.

I found a comparable filter (Wix46433) that is only about a half inch longer, 1.2" thinner, flows 625CFM and only costs $25. I'm working on a project to mod the stock 1stGen airbox for it.

You 2nd Gen guys are on your own.

 

Thanks for all the info guys. I seen an old post with a picture of the evil ones filter with a blue prefilter...is that the same one and if so, do you have the part#? And did it come with the prefilter?

 

I can probably dig up the p/n for you tonight. It does not come with a prefilter - thats extra about $30 or so.

 

That would be great thanks.

 

Sorry, I cant read the p/n on the box.

Ill find it for you though.

 

Ok, found it The AFE p/n is: 21-90010 for the Prodry S BHAF.

Measurements are: 4-1/2"F x 8-1/2"B x 7"T x 9"H


If I have time tomorrow I will try to get a pic for you..

 

Awesome, thanks i appreciate it.