help? track bar conversion
#21
#23
You can use the post-2/94 track bars IF you drill out the mounting hole on the drivers side frame. I went thru this when I was pricing aftermarket track bars last year for my truck. All the good aftermarket ones are not available for the early 94s (Solid Steel, Thuren, etc.).
I ended up doing the Solid Steel 3rd gen adj. track bar conversion and used a smaller bolt so I didn't have to drill it out.
I ended up doing the Solid Steel 3rd gen adj. track bar conversion and used a smaller bolt so I didn't have to drill it out.
#26
I have a snap on 1.5" taper bit that I am trying to sell.
I used it for my 1 ton chevy steering upgrade on my 98 ram.
I had to ream the knuckles so it would allow for the larger TREs
I got mine from Snap on for $63
but if you drill for the solid steel set up I dont believe it has to be tapered.
I used it for my 1 ton chevy steering upgrade on my 98 ram.
I had to ream the knuckles so it would allow for the larger TREs
I got mine from Snap on for $63
but if you drill for the solid steel set up I dont believe it has to be tapered.
#27
The kit comes with a tapered insert to fit the post 2/94 trucks.
Guess you would haveta find a similar tapered insert or get one machined. I didn't really worry bout it, just cinched it down really good. Since with the new Solid Steel mount ya have 3 bolts sharing the load one once did (steering box bolt, bolt thru the crossmember hole, and the old track bar mount bolt).
Guess you would haveta find a similar tapered insert or get one machined. I didn't really worry bout it, just cinched it down really good. Since with the new Solid Steel mount ya have 3 bolts sharing the load one once did (steering box bolt, bolt thru the crossmember hole, and the old track bar mount bolt).
Last edited by ndurbin; 06-05-2007 at 03:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CGwill
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-26-2015 02:10 AM
Diesel Bombers
Latest Automotive Industry News
0
11-11-2014 06:00 PM
Diesel Bombers
General Diesel Related
0
11-11-2014 02:30 PM