Blowin Coal
#1
Blowin Coal
Hey guys i just bought my first dodge and at that she a cummins!! I bought a 1997 reg cab long box 4x4. I was just wonderin what is the easiest way to make these blow coal. i know you can get a plate in your injector pump is there anything else that will help her out.
thanks chris
thanks chris
#2
Oh boy... Just you wait.
And congratulations.
First off... go ahead and degrease your engine real good, wash it and if possible steam clean it. Get every nook and cranny from top to underneath 'cause you are about to spend a lot of time under that hood.
Gauges... get a boost and pyrometer first before any mod's...
Then these other guys are going to turn you on to some cool quick power that will have you wanting more, and more, and more, and...
Get it clean - real clean - then I spray mine down with WD-40 and wipe it down really really good - give it a couple of weeks and then wipe it down again. Then you will be nice and clean to start wrenching...
It's too late for me to get into it tonight but be patient - you will learn a lot.
Again... Congrats!
Service everything and keep it well maintained...
And congratulations.
First off... go ahead and degrease your engine real good, wash it and if possible steam clean it. Get every nook and cranny from top to underneath 'cause you are about to spend a lot of time under that hood.
Gauges... get a boost and pyrometer first before any mod's...
Then these other guys are going to turn you on to some cool quick power that will have you wanting more, and more, and more, and...
Get it clean - real clean - then I spray mine down with WD-40 and wipe it down really really good - give it a couple of weeks and then wipe it down again. Then you will be nice and clean to start wrenching...
It's too late for me to get into it tonight but be patient - you will learn a lot.
Again... Congrats!
Service everything and keep it well maintained...
#3
if u have an auto transmission get a aftermarket valvebody and torque converter put in, if its manual have a aftermarket clutch put in, get gauges, then take the plate out and take the arm out of the pump... ur smoke alot... then when u realize its too much smoke u can put the arm back in
#5
agreed, after you get your guages start with an intake and exhaust. tell us what trans you have and how much power you want ... oh and clean burn is the way to go smoke looks cool but is useless
#6
thanks guys. Its a 5 spd. I think im just going to hack the muffler off and put a piece of pipe in on that end of things, atleast for now. yea i just think theres nothin cooler than a cummins blowin black smoke...im just a sick individual tho . Some more power would be nice but it really does have plenty for towing a livestock or car trailer and thats all I will do with it.
#8
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
2
05-14-2015 04:27 AM
05cumminsCA
5.9 Liter CR Dodge Cummins 03-07
8
02-03-2015 09:29 PM