Guess that horsepower!!
Diesel Wrench
Joined: Aug 2009
Posts: 501
Likes: 49
From: Duncan, Oklahoma
Bout tree-fiddy...if eets dat dino from da deep...gawtdang loche ness monsta!!! 
But dependind on what Dyno and whether you can get the trans to load, I think H.R.D. nailed it. It's gonna be HOT though, I fear.
But dependind on what Dyno and whether you can get the trans to load, I think H.R.D. nailed it. It's gonna be HOT though, I fear.
my guess will be much lower, you are way over fueled for that turbo and if all you have done is yanked the plate added 2x the size of stock injectors and the dirtiest DV's available with an untuned AFC it will be a hot smokey mess with sub par results on the rollers.
275-325 due to the fact that you prolly cant rev past 2200 rpms with your stock gov springs.
275-325 due to the fact that you prolly cant rev past 2200 rpms with your stock gov springs.
Last edited by turbo2332; Apr 25, 2013 at 10:44 AM.
Oh wait, that was my 04 Ford PSD........................
Thread Starter
|
Diesel Fan
Joined: Mar 2013
Posts: 11
Likes: 0
The pump has been tuned, I wouldn't go through all that without tuning it 
I also gotta set of 4k gov springs and 110lb valve springs to go in just have to find time. I'm hopin to creak the 300s. I would really like to break 400 but I'm not going to get hopes up.
I also gotta set of 4k gov springs and 110lb valve springs to go in just have to find time. I'm hopin to creak the 300s. I would really like to break 400 but I'm not going to get hopes up.
