5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

Finally building my truck! Looking for advice.

  #1  
Old 02-26-2013, 10:05 PM
greasemonkey1's Avatar
Newbie
Thread Starter
Join Date: Feb 2013
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Finally building my truck! Looking for advice.

Hi! Been lurking for months reading and researching general cummins stuff, but I can finally get specific! I have a 94 suburban that I have procured a 94 5.9l 5 speed donor truck for (for a steal i'm told). The cummins is bone stock from what I can tell. Security bolt still on the pump, wh1c turbo, 300K miles. Broken nv4500, only 4th works im told. Thinking the p/o broke a counter shaft. Since the motor will be out on a stand and getting cleaned, inspected, and gasketed, and knowing that once its in the sub im most likely not going to screw with it, I want it right the first time. I live in N. California at 500 feet. Around town is flat, but out of town anywhere but south is mountains at 6 to 8 percent and 4 to 8 thousand feet. The truck will be a DD/tow pig. Usually cars, but up to 10k in a dump trailer when I go firewood cutting. The sub has 3.73 gears and 1 ton everything. Im currently driving a 6.2l, so anything will feel like a rocket. Im looking for all the easy, cheap, safe(ish) power on the table, and am hoping in the high 2/low 3 hundred range. My plan is gauges (boost, pyro, fuel pressure), kdp, upgraded fuel lines to the pump, #10 profile plate, afc mods, 2095 plug, 4k gsk and valve springs (getting a valve job anyway), bhaf, 4" exhaust w/ see through muffler, 16 degrees or so of timing, turbo exhaust drilled to gate all 6 cyl., waste gate set at 35 lbs. Stock injectors and stock turbo. Im told the wh1c is 54 or 56/60/12, should I get a bigger compressor housing and what size? They go up to 62mm for this one. Should I consider DVs? Stock are 131 im told. Injectors and turbos are expensive, and my power goals seem modest to me. I have no problems keeping an eye on a pyro, but within reason. Where do you guys think this would put me? What else should I do?
 
  #2  
Old 02-28-2013, 11:38 AM
jkidd's Avatar
Diesel Bombers Sponsor
Join Date: Jan 2008
Location: Kaysville UT
Posts: 1,100
Received 77 Likes on 71 Posts
Default

We have trans rebuild kits. Buy a clutch that is matched for the power you want. 215HP injectors will work well for a DD that is tuned. not sure how much power your drive train can handle.... so I would not go big.

Consider 60# valve springs and 3/4k gov springs. YOu can tune and get by with very little in parts cost.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
prixibel
Diesel Bombers Introduction
2
06-16-2015 02:49 PM
wannadrag
Ford Powerstroke 03-07 6.0L
7
05-25-2015 03:07 PM
mountainmover
Big Rigs & Semis
0
03-01-2015 06:03 AM
Mikeyfz45083
Transfer Sled Pulling
2
11-14-2014 11:04 AM
Diesel Bombers
Latest Automotive Industry News
0
10-14-2014 08:40 AM


Thread Tools
Search this Thread
Quick Reply: Finally building my truck! Looking for advice.



All times are GMT -5. The time now is 06:51 AM.