is there any way that i can kill the seat belt reminder in my truck is there any wires that i need to jump across to fool the computer i cant stand the alarm on the truck when i am off on the dirt roads please help

 

There's probably a wire under the seat that goes to the buckle, just unplug it.

 

I just got an extra buckle and tied a little piece of strap to it that I keep in the console so that when I'm on the dirt roads or driving around on my land I can take my seat belt off and click that one in there to shut it up

 

There is a procedure in the manual to cut off the dinger that involves plugging and unplugging the belt while you cycle the ignition on and off. It disables the annoying sound, but leaves the light on the dash on. Let me know if you can't find it I will look for it. Good luck.

 

Unplug the connector under the seat and jumper the two pins in the plug. Gets rid of both the chime and the dash light.


NP

 

ok so i found the procedure what you do is plug the seat belt in then turn the key to the on position undo the seat belt and redo it 3 times with the key to the run position and then turn the key off then you are good to go i am so happy that that thig is gone its annoying as hell

 

Yeah, it's pretty nice to not have that dinger ringing in your ear. The light stays on, but I can deal with that much better. Enjoy!

 

thanks i jumped the wires in mine. but ill do that to my dads tomorrow