Keep getting this 0069 code at idle or low rpm. Replaced Idle Air Temp IAT sensor and MAP sensor. Tried with and without quadzilla boost fooler. Still pops code and immediately goes into limp mode till i erase the code. Anybody got any ideas?

 

This is actually throwing P0236 code. The 0069 code was wrong. It runs in limp mode as soon as the light comes on when idling or running at lower rpm.

 

Wiring look ok? I'm away from my repair manual so I can't get too in-depth at the moment.

 

I'll check a little more. Everything seemed normal and put dielectric on map and AIT sensors