how hard is it to remove the headliner?


want to pull it so i can install some dynamat.

 

Never done it but overhead counsel grab handles visors and side panels between the doors and it should come out

 

You have to remove all the trim panels from the front around the windshield, the back tan ones around the rear window and the ones on the center post (if you have a mega/quad cab). Basically any tan colored parts have to be removed. As well as the sunvisors and sunvisor clips and center console and grab handles.

Its a bit of time consuming work, but can be done. Make sure you hands and tools are clean to keep from leaving nasty grease marks on your head liner, they are a pain to get out.

 

Speaking from experience on the grease marks?....

 

If its a single cab, its pretty easy if its a 4door of mega cab, it is kinda time consuming.

 

quad cab.

just wanted to ask because someone was saying i'd have to remove the rear window.

 

Hardest part will be getting it out the door.

 

You can get the headliner out without removing the back window. you have to fold your seats down flat and weasel it out one of the front doors if I remember right.

I had to replace my back window a few years ago, and it still leaked, so pulled headliner and gooped it up good so it wouldnt leak

 

if you take the head liner out let me know how you get it out of the cab to change color of head liner i am ggoing to try a king size bed sheet