5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

My Cummins problem. Need Help!!!

Old Dec 21, 2009 | 02:48 PM
  #1  
tbret27's Avatar
Thread Starter
|
Newbie
Joined: Sep 2009
Posts: 4
Likes: 0
Default My Cummins problem. Need Help!!!

I have a 2006 Dodge Ram 2500, 5.9l Cummins. 48RE transmission. I'm having a serious problem with it and need advice.
The engine idles fine in park, but when I put it in reverse or drive it powers up and wants to take off It also does it any time I stop. If I let it roll out it runs back to normal if its above 5 mph, if I brake below 5 mph it power back up. Someone told me it sounds like the Torque Converter is locked up. Has anyone encountered this problem? Any solutions?
HELP!!! NEED ADVICE!!!
 
Reply
Old Dec 21, 2009 | 03:25 PM
  #2  
wildbill's Avatar
BOMBARDIER
Joined: Jul 2007
Posts: 12,809
Likes: 668
From: Billlings, MT
Default



Any mods done to the truck, is the CEL on?? Also, how does it drive going down the street?? It roll through the gears ok and when you hit 35 with O/D off, can you feel the converter lock??
 
Reply
Old Dec 21, 2009 | 03:29 PM
  #3  
yj junker's Avatar
BOMBARDIER
Joined: Mar 2008
Posts: 488
Likes: 24
From: Turtle Creek N.B. Ca
Default

mine did that last week ,torque was locked, had to replace mine and did the trans. while it was out
 
Reply
Old Dec 21, 2009 | 04:45 PM
  #4  
tbret27's Avatar
Thread Starter
|
Newbie
Joined: Sep 2009
Posts: 4
Likes: 0
Default

Yes I have an Edge Chip with attitude, afe stage 2 cold air, no lift, 305 65r 17 tires. I dont ever lay into it or hot rod it.
 
Reply
Old Dec 21, 2009 | 04:50 PM
  #5  
wildbill's Avatar
BOMBARDIER
Joined: Jul 2007
Posts: 12,809
Likes: 668
From: Billlings, MT
Default

Does it lunge forward when you shift from R to D??
 
Reply
Old Dec 21, 2009 | 05:55 PM
  #6  
tbret27's Avatar
Thread Starter
|
Newbie
Joined: Sep 2009
Posts: 4
Likes: 0
Default

If I'm in reverse and it idles up, i then try to put it in drive it will try and jump but shuts the engine down. I just put it in netural before changing next gears or park. When I do that the rpm's jump way bad like I reved it up and then returns to normal idle. So when ever in gear below 5 mph it's like the throttle is being pushed a little.
 
Reply
Old Dec 21, 2009 | 06:03 PM
  #7  
dshane62's Avatar
Diesel Fan
Joined: Dec 2009
Posts: 59
Likes: 2
From: phoenix az.
Default

unhook your chip and then try it
 
Reply
Old Dec 22, 2009 | 12:25 PM
  #8  
tbret27's Avatar
Thread Starter
|
Newbie
Joined: Sep 2009
Posts: 4
Likes: 0
Default

ok i took it to the dealership and had them run diagnostics. It is the chip according to them, they want to unplug it and flash the ECM. Hopefully that fixes it. I still want the chip so i'm going to send it to Edge and have them flash their programer. Anybody else had a problem with an Edge Juice w/ Attitude?

I want to say thanks to all you guys for your support, you guys are awesome!

---AutoMerged DoublePost---

Well they unhooked it and now the trouble codes are reading torque coverter and throttle control valve. OUCH!
 

Last edited by tbret27; Dec 22, 2009 at 12:25 PM. Reason: Automerged Doublepost
Reply
Old Dec 22, 2009 | 12:49 PM
  #9  
BigRedFireTruck's Avatar
Diesel Fan
Joined: Nov 2009
Posts: 48
Likes: 1
From: Chicago
Default

I have heard about problems with Edge products.... but not what your describing...
 
Reply
Old Dec 29, 2009 | 09:49 PM
  #10  
Diesel Nut's Avatar
Diesel Bombers Sponsor
Joined: Jun 2007
Posts: 1,321
Likes: 109
From: Sacramento
Default

The stator in your converter is failing. Seen it many times. You need a new converter. The throttle valve issue, depending on the code, could be as little as an adjustment or as much as a TV Motor replacement.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:53 AM.